The t.mix 2442FX MKII, Руководство пользователя

Страница: 11 / 20

2442FX MKII / 3242FX MKII USER’S MANUAL
11
Cleaning and Care
NEVER submerse the device or its
components in water or other fluids! Do
not allow any liquids to penetrate the
housing. This would damage the device
or cause a short circuit.
Cleaning the housing: Remove the power plug from
the power socket beforehand.
Clean the housing surface with a slightly damp cloth
Never use petrol, solvents or detergents that can
damage the units surface!
Disposal
Do not dispose of the device at the
end of his operating life in your normal
domestic waste. This device is subject
to the European Guidelines 2002/96/
EC.
• Have the product disposed of by a professional
disposal company of by your communal disposal
facility.
• Observe the currently applicable regulations. In
case of doubt contact your disposal facility.
• Dispose of packaging materials in an
environmentally responsible manner .
Rear Panel
62. Phantom Power
When this switch is in the on position, it activates
+48V of phantom power for all microphone inputs,
allowing condenser microphones (well, the ones that
don’t use batteries) to be used on these channels.
Activating Phantom Power will be accompanied by
an illuminated LED above the left channel Level
Meter. Before turning Phantom Power on, turn all
level controls to a minimum to avoid the possibility
of a ghastly popping sound from the speakers.
NB. Phantom Power should be used in conjunction with balanced
microphones. When Phantom Power is engaged, single ended
(unbalanced) microphones and instruments should not be used
on the Mic inputs. Phantom Power will not cause damage to most
dynamic microphones, however if unsure, the microphone’s user
manual should be consulted.
63. Power Switch
You can use it to turn the mixer on and off. Ensure
you turn all level controls down before activating.
64. Power Connector
Used for the addition of a power cable and supply,
allowing power to be supplied to the mixer. Please
use the power cable that is included with this mixer
only. The Fuse holder, located above the AC Power
connector, is, of course, for the MIX mixer’s fuse.
If the fuse happens to blow, open the holder cover,
and replace the fuse with a suitable replacement (as
indicated on the fuse holder’s cover).
62
63 64