The Swingset THE SUPREME, Руководство по установке

Страница: 5 / 31

Step 1: Create Two A-Frames
Parts Needed:
A
1
2
x4
x4
x16
Lay the four Posts (#1) on the ground as
shown. Using the four Crossbeams (#2),
construct two A-Frames as shown to the
right. Place the Crossbeams (#2)
between the lines as shown in figures A
& B. Make sure the Crossbeams are
completely square & perpendicular to
the Posts. Attach using two “A” Screws
at each end of the Crossbeam. Use the
provided drill bit (T-25) to attach all the
screws in this manual.
[Tip: use a 90 degree angle to ensure the
beams are square & perpendicular]
x1
T-25
5 Section 1 The Swingset Company
Make sure all beams are
flush to the edges of the
posts, as shown.
Figure B
Figure A
A
A
A
A
1
2
2
2
2
2
1
1
1
1
1
2
Now repeat Step 1 for the second fort.