3
FOR VIDEO INSTALL INSTRUCTIONS GO TO TheStandingDesk.com/install
STANDING
THE
DESK
THE KLOUD
FLEXI LIFT TABLE
ASSEMBLY INSTRUCTIONS
CLEANING RECOMMENDATION
Cleaning recommendations for powder-coated surfaces
For optimal care and cleaning of powder-coated surfaces the recommendations below should be followed:
•
Use only a soft cloth or industrial cotton wool. Refrain from rubbing hard.
•
Surface and cleaning agent temperatures <25°C. (Do not steam clean surface.)
•
Clean stains with a damp soft cloth. Use cold or lukewarm water. Small amounts of neutral or alkaline detergent
additives may be used if necessary.
•
Do not apply detergent for extended periods of time. If necessary repeat cleaning process after 24 hours. Wipe with
cold water immediately after cleaning. (Use a damp (not wet) cloth.)
•
Do not use scratching or abrasive agents.
•
Do not use acidic or strongly alkaline detergents.
•
Do not use organic solvents which contain ester, ketone, alcohols, aromatic compounds, glycol ether, halogenated
hydrocarbons or similar substances.
NOTE: Do not lubricate or use cleaning agents on the dry guides in the guide columns. Never use any silicone products as
this can lead to squeaking of the guide columns.
