FOR VIDEO INSTALL INSTRUCTIONS GO TO TheStandingDesk.com/install
THE LÜFTEN
TWIN COLUMN TABLE
ASSEMBLY INSTRUCTIONS
THE LÜFTEN
TWIN COLUMN TABLE
ASSEMBLY INSTRUCTIONS
FOR VIDEO INSTALL INSTRUCTIONS GO TO TheStandingDesk.com/install
2 / 4
3 / 4
3
4
Hex Socket Cap Screw (8)
M8 Allen Wrench
1/2” Wood Screw
#2 Phillips Head Screwdriver
Boden Cord Clip (1)
1
2
Flat Head Cap Screw (8)
M6 Allen Wrench
1” Wood Screw (8)
#2 Phillips Head Screwdriver
• Remove traveling screws from both columns.
CAUTION: When screw is removed from the
column without the Boden cord attached, the
column will move in and out freely.
• Attach the top plate to the column containing
the Boden cord with the FLAT HEAD CAP
SCREWS and the M6 ALLEN WRENCH.
• Pull the remaining column up to the top plate
and again secure it with the FLAT HEAD CAP
SCREWS.
• Flip over the
columns and top
plate and align
the holes on the
top plate with the
pilot holes on the
worksurface.
• Attach the top plate
to the worksurface
with the 1” WOOD
SCREWS and
PHILLIPS HEAD
SCREWDRIVER.
• Slip the base over
both the columns
and attach the base
with the SOCKET
HEAD CAP SCREW
and the M8 ALLEN
WRENCH.
• Attach the handle
to the worksurface
with the 1/2” WOOD
SCREWS and a
PHILLIPS HEAD
SCREWDRIVER. Slip
the BODEN CORD
CLIP over the Boden
cord and secure with
the last 1/2” WOOD
SCREW to the
remaining pilot hole.
SEAM SIDE