The Splash Lab TSL.670, Установка и обслуживание, Страница: 6 / 12

before you install
!
Caution
+ The TSL.670 parts must be put together correctly before installation.
+ All parts must be installed correctly before powering up the system.
+ Ensure that connection is to 1 ¼” standard waste pipe.
+ Ensure that the thread on the basin waste fitting is clear for trap to be
screwed tight and connection sealed.
6 TSL.670 MANUAL
FRONT
SIDE
Access Requirements
It is critical all components which require fixing beneath the basin are easily accessible
at all times during installation and routine maintenance.
Front access: If there is an under sink IPS unit, an access hatch is a requirement to
allow for installation and routine maintenance of the waste grate.