The Splash Lab TSL-470, Установка и обслуживание

Страница: 4 / 12

4 TSL-470 SOAP DISPENSER MANUAL
Location
The TSL-470 dispenser is normally mounted in the wall panelling above a basin or
counter-top. As a guide, we would recommend that a minimum distance of 4" between
the dispenser and any adjacent tap, but this is ultimately only a guide measurement.
It is important that the reservoir is mounted below the dispenser, otherwise there is
a risk that the soap in the reservoir will syphon out of the reservoir. The dispenser is
designed for the soap to be drawn from a reservoir mounted below the level of the
dispenser.
NOTE: The L470 soap dispenser needs to be used with one of The Splash Lab’s Liquid
soap feed systems listed below (to be specified separately)
LMT1
Single feed soap system – 1 litre reservoir
LST1 Single feed soap system – 5 litre reservoir
LST2 Multi-feed soap system – dual feed – 5 litre reservoir
LST3 Multi-feed soap system – triple feed – 5 litre reservoir
LST4 Multi-feed soap system – four feed – 5 litre reservoir
before you install
5-3/8"
O
3/
8"
O
1-
15
/1
6"
3-11/16"
1"
3/16"
5/
8"
O
13
/1
6"
O 11/16"
WALL CUT-OUT
SIDE
5-3/8"
O
3/
8"
O
1-
15
/1
6"
3-11/16"
1"
3/16"
5/
8"
O
13
/1
6"
O 11/16"
WALL CUT-OUT
FRONT
CUT-OUT