E - 6
OPERATION (continued)
1
A
KARAOKE FUNCTIONS
Sing along with the music by plugging the provided microphone into either one of the microphone jacks on the
unit.
WARNING
: Tapping or dropping the microphone can permanently damage your microphone. Do not swing the
microphone around by the cord as this will damage the microphone.
REPEAT
To repeat the track currently playing, press the REPEAT button
once. The REPEAT ONE ( ) indicator will light up.
To repeat all tracks, press the REPEAT button twice. The REPEAT
ALL ( ) indicator will light up.
To clear the REPEAT function, press the REPEAT button again. The
NO REPEAT ( ) indicator will turn on.
PROGRAM
Use the PROGRAM button to program and play songs in a pre-
selected order.
1. Programming can be done in the Stop mode only. Press the
PROGRAM button, the “PROG SET 01:--” (-- is total number
of tracks) will show on the monitor. Press the SKIP buttons to
select a desired track.
2. Press the PROGRAM button to confirm the entry. You can
repeat the same steps for a maximum of 20 tracks.
NOTE
: “PROG FULL” will be shown on the monitor if you attempt
to program more than 20 tracks.
3. Press the PLAY button after you have completed the
programming process and you are ready to listen to your
selected tracks. Press the STOP button to clear all the
programmed entries.
DISCO LIGHT OPERATION
To illuminate the Disco light, press the Disco Light button to switch it ON. Press it again to switch it off.
MIC VOLUME
Adjust the MIC VOLUME control to a desired level to obtain
the best performance.
WARNING
: To avoid microphone feedback, do not hold the
microphone too close to the speakers.
ECHO
Adjust the ECHO control to enhance the singers’ voice for a
concert hall effect.
BALANCE
Allows you to eliminate the lead singers’ voice by rotating the
knob to the left when playing a multiplex recording or eliminate
the music when rotating the knob to the right.
NOTE
: When playing an audio CD or CDR/RW with downloaded
music, the balance knob will shift the recording to the right or
left speaker.
AUTO VOICE CONTROL (MULTIPLEX DISCS ONLY)
Allows you to replace the lead singer’s voice with your own
when playing a multiplex recording. The vocals on the
multiplex recording will be muted when using the microphone.
When the microphone is not in use, the pre-recorded vocals
will resume on a multiplex disc. The Auto Voice Control can
be activated by pressing the A.V.C. ON/OFF button.
STVG529L-ENG(US).qxp_Layout 1 1/7/14 2:16 Page 6
