The Singing Machine SMG303 Скачать руководство пользователя страница 2

E-1

WARNINGS

CAUTION: 

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol is intended to alert you to the presence of uninsulated
dangerous voltage within the product's enclosure that might be of
sufficient magnitude to constitute a risk of electric shock. Do not open
the product's case.

WARNING:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

This symbol is intended to inform you that important operating and
maintenance instructions are included in the literature accompanying
this product.

Class II equipment symbol.

This symbol indicates that the unit has a double insulation system.

DRIPPING WARNING:

The product shall not be exposed to dripping or splashing and

that no objects filled with liquids, such as vases, shall be placed on the product.

Warning:

Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the
main plug should be disconnected from the main socket outlet completely.

Warnings:

• 

This CD player employs a laser light beam. Only a qualified service person should
remove the cover or attempt to service this device, due to possible eye injury.

• 

The use of controls, adjustments, or procedures other than those specified
herein might result in hazardous radiation exposure.

• 

The apparatus shall be used in an open area.

PRECAUTION!

Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.

VENTILATION WARNING

The normal ventilation of the product shall not be impeded for intended use.

SAFETY CERTIFICATION

This device is made and tested to meet safety standards of the FCC, requirements
and compliance with safety performance of the U.S. Department of Health and
Human  Services,  and  also  with  FDA  Radiation  Performance  Standards  21  CFR
Subchapter J.

IMPORTANT FCC INFORMATION

Since CD circuitry may cause interference to other radio tuners nearby, turn this
unit off when not in use or move it away from the affected radio tuner.
This device complies with part 15 of the FCC rules, operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

Important Safety
Information

1. Read these Instructions.
2.  Keep these Instructions.
3.  Heed all Warnings.
4.  Follow all Instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.  Do not block any of the ventilation openings. Install in accordance

with the Manufacturer’s instructions.

8.  Do  not  install  near  any  heat  sources  such  as  radiators,  heat

registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than
the  other.  A  grounding  type  plug  has  two  blades  and  a  third
grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.

10. Protect  the  power  cord  from  being  walked  on  or  pinched

particularly  at  plugs,  convenience  receptacles,  and  the  point
where they exit from the apparatus.

11. Only 

use 

attachments/accessories

specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or
sold  with  the  apparatus.  When  a  cart  is
used,  use  caution  when  moving  the
cart/apparatus combination to avoid injury
from tip-over.

13. Unplug  this  apparatus  during  lightning

storms or when unused for long periods of time.

14. Refer  all  servicing  to  qualified  service  personnel.  Servicing  is

required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.

15. VENTILATION - Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the product
and to protect it from overheating, and these openings must not
be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a book case or rack unless proper ventilation is provided.

Under the influence of electrostatic phenomenon, the product may malfunction and
require user to reset.

NOTE

: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for
help.

SMG303-v4_Layout 1  5/6/14  5:58 PM  Page 1

Содержание SMG303












Отзывы: