Two (2) “AAA” size batteries can also be
used to provide a backup for the clock and
alarm times for this unit as follows:
1. Open the battery door by removing the
screw, then removing the door.
2. Insert two (2) “AAA” batteries as shown.
Alkaline batteries are recommended for
the longest playing time.
3. Place the battery door back on and
replace the screw.
NOTES:
• The batteries are used to back-up the clock and alarm times when the
AC adapter is disconnected or there is a power failure.
• The battery indicator will appear or blink in the display when there are
no batteries or the batteries are low and need replacing.
IMPORTANT!
See BATTERY PRECAUTIONS on the next page.
6
POWER SOURCE
BATTERY INSTALLATION
AC CONNECTION
Insert the small end of the AC adapter
into the DC IN 6.5V jack (located on the
rear of the unit). Connect the other end
to a wall outlet having 120V AC, 60 Hz.
AC Adapter, DC 6.5V
Z
NOTES:
•
Remove both the DC plug and the
AC-IN plug to disconnect the AC adapter when not in use.
•
Only use the supplied AC adapter which has the following specs:
DC 6.5V
Z
To DC IN Jack
