10/2021 V 1.1
VIEW 22
6mm min
Wall Profile
Glass Panel
04/17
Remove and replace the Panels adding
or subtrac�ng spacers as necessary to
level the Panel (to a maximum height
of 5mm inside the Underframe).
Check the Panel is level using a Spirit
Level.
Check the Return Panels has a 4mm
gap between the Panel and the front
face of the Front Underframe.
Ensure there is adequate glass in both
the Wall Profiles. (6mm is minimum)
If the Wall Profiles are flush with the
Glass Panels, move on to step 18.
If the Wall Profiles are not flush with
the top of the Glass Panels, mark the
Wall Profile. Using a straight edge,
mark where the wall channel needs to
be trimmed.
To protect the channel finish, it is
recommended to mark on masking
tape.
13
14
15
16
4mm
