Test
Head Office
The Radiator Centre, 7 Holywell Hill, St Albans, AL1 1E
Tel: 01727 840344
Outline Electric
Fixing Instructions
Key
Component
A
Radiator
B
Wall mounting brackets
C
Screws*
D
Radiator bottom holding bracket
E
M6 x 12mm capscrew
F
Wall holding bracket
Qty
1
2 (these are packed with radiator for transit)
6 required in total
1 (packed with radiator)
1
1 off
*
The Eskimo brackets supplied with your radiator are fully designed to carry the weight of the radiator.
Fixings (Screws, wall plugs etc) are not supplied with the radiator. Fixings must be selected according to wall
material and construction, i.e. brickwork, plasterboard, wood panelling etc. The minimum design load per
fixing should be sufficient to carry its share of the weight (as stated on your delivery note) of your radiator eg
if you are need four fixings only then each must be designed, as a minimum, to carry one quarter of the
weight of your radiator - for eight fixings - one eighth of the weight each, etc
Tools required
Tape measure
Spirit Level
Electric Drill
Masonry drill bit to suit wall plug or screw size (Eskimo brackets will take screws up to 7mm in diameter)
Screws & Wall plugs as required
Screwdriver
**Gong radiators – Eskimo supplies cotton jeweller’s gloves with these finishes; please ensure your
installer wears these at all times to avoid unnecessary cleaning after installation
