Replace UV Bulb
Replace the UV bulb by gently removing the bulb
from the socket and replacing with a new one. Avoid
touching the new bulb with your hands as the oils
from your skin cause damage to the bulb.
Transfer Rubber Cap
Be sure to remove the rubber cap from the old bulb
and place it on the new bulb.
Clean Quartz Sleeve
Clean the quartz sleeve using a soft damp cloth. Any
debris buildup will greatly reduce the effectiveness
of the UV Clarifier. If your quartz sleeve is cracked or
damaged, it must be replaced. Note: Condensation
may form on the quartz sleeve. This cannot be avoided
and does not impair the function or safety of the unit.
Reassemble UV
Once cleaned, reassemble the o-ring and quartz sleeve
and lock into place with the tension nut and screw.
Connect UV Housing
Place the UV housing back on to the UV and twist to
lock into place.
Test UV
Temporarily plug in the UV Clarifier to test. The view
window on the UV housing will tell you if the UV bulb
is working.
15425 Chets Way | Armada, MI 48005
9
