background image

D.  Plunger assembly/pump handle.

E.  Pump Cap

F.   Plunger Cap

G.  Cylinder Gasket

H.  Cylinder Assembly

I.  Pump Cylinder Check Valve 

J.  Pressure Relief Valve
NOTE: To open pump assembly: Unscrew cylinder assembly (H) and pull out plunger assembly (D) 

from cylinder assembly (H).

The pump leaks at the tank opening:

Clean the tank gasket.

Pumping doesn’t pressurize your sprayer:

Lubricate the plunger cup (F) with petroleum jelly.  
If damaged, sprayer must be replaced.

Pump won’t pressurize and/or liquid gets into the pump:

Clean the pump cylinder check valve (I). If damaged, check 
valve must be replaced. The check valve is included in the 
O-Ring Kit (580176). Check to make sure pressure relief valve 
is in the closed position.

SERVICING THE HOSE ASSEMBLY AND SPRAY HANDLE

NOTE: To open hose assembly: Unscrew cap nut (M) and pull out supply tube (K) from  

spray tank (A).

K.  Supply Tube 

L.  Supply Tube to  

  Hose Connector 

M. Cap Nut 

N. Hose 

O.  Spray Lever 

P.  Valve Port 

Q. Filter

Sprayer leaks between tank (A) and hose assembly (B):

Clean and inspect cap nut (M) and o-ring. Re-tighten by hand.

You pump up the sprayer and nothing but air comes out of  
the nozzle:

Inspect, clean and reinsert the supply tube (K). Inspect, clean 
and reinsert filter (Q).

There is a leak between spray handle and spray wand:

Inspect and clean o-rings on spray wand (P) and spray handle.

Spray will not stop: 

Inspect and clean o-rings on spray wand and spray handle.

Little or no spray is coming out of the spray nozzle:

Clean the valve port (P) and filter (Q) in the spray handle with 
toothpick or soft brush and rinse with water.

Hose (N) is damaged or leaking:

Replace with part #580179.

Debris repeatedly clog sprayer:

Strain solution with cheese cloth or filter.

Spray nozzle is clogged:

Clean with toothpick or soft brush and rinse with water.

ADDITIONAL HELP AND INFORMATION:

For any questions regarding ordering replacement parts, our warranty service, pond sprayer  

assembly or usage call us at 866-POND-HELP (766-3435).

O

P

SPRAY HANDLE CLOSE-UP

K

M

L

N

CAP NUT CLOSE-UP

6

D

H

E

F

G

I

Q

J

Servicing Your Sprayer:

Содержание 580175









Отзывы: