1)
Position the pump so they can be accessed in the future.
2)
Prepare the site.
a.
Make sure the area is stable and level.
b.
Ensure adequate drainage to allow for periodic maintenance and winterization that will not
result in damage to the surrounding area.
c.
Ensure electric is run to site on GFI circuit and complies with all codes by the authority
having jurisdiction.
d.
For fire option ensure there is correct gas type, plumbed to site, of sufficient BTU, install by
a certified installer and inspected by the authority having jurisdiction. Refer to the correct
fire pit instructions.
3)
Open the crate of you r water feature being careful not to damage the unit.
a.
Clean the water reservoir all debris left from the shipping crate.
4)
Inspect your water reservoir for any visual damage or defect.
5)
Set water reservoir in place. This will require at least 2 people.
6)
Mount your water feature to the basin tower when applicable.
7)
Level your water feature
a.
The adjustable legs may also be used for minor height adjustments. Do not adjust out
more than 6.25” from the bottom of the flange to the bottom of the foot or the feature may
collapse.(Figure 7)
