LED MOVING HEAD LIGHT USER MAUAL
THE-ONE OPTRONICS CO.,LIMITED
4
www.theonelights.com
OPERATIONS
1. In the main window ,in turn press “ESC” button
，
select DMX mode
、
auto mode or sound mode
，
In DMX mode
：
press “UP” “DOWN”to select DMX address
；
In Auto mode
：
press “UP”“DOWN”to select the device to be a Master or Slave
In sound mode
：
press“UP”“DOWN”to select the device to be a Master or Slave
1.1 setting up DMX address
In the main window, press“ENTER” into main menu
，
press“UP” or“DWON”selection“1.DMX Address”
，
and then press“ENTER”into
parameter set
，
then press“UP”or“DOWN”to can be set DMX address parameter
，
then press“ENTER” to save
，
press“ESC”to
surrender.
1.2 setting up device working mode
The device can be working the following three modes of either one: DMX mode, auto mode or sound mode
；
In the main window, press“ENTER”into main menu
，
press“UP”or“DWON” to select “2.Work Mode”
，
then press“ENTER” into
parameter saving
，
and then press“UP”or“DOWN”to select working mode
，
then press“ENTER”can be save setting
，
press“ESC”to
surrender setting.
1.3 setting up Master/Salve mode
When the unit is AUTO or SOUND mode
，
can be setting unit as Master/Salve
，
as Master
，
the unit in the Auto at the same tine
will be sent to the other asynchronous data. In Slave
，
the unit is not sent the data to others
，
and do not affect the same line of the
normal work of the other light
，
setting as below
：
In the main window
，
press“ENTER” into main menu
，
press“UP”or“DWON” to select“3.Master”
，
then press“ENTER”into
parameter
，
then press“UP”or“DOWN” to select Mater/Slave mode
，
after setting
，
press“ENTER”to salve setting
，
press“ESC”to
surrender
。
1.4 setting up PAN run direction
In the main window
，
press“ENTER”into main menu
，
press“UP”or“DWON”to select“4.Pan Invert”
，
press“ENTER”into parameter
setting
，
and then press“UP”or“DOWN”to select PAN forward rotating or inversion
，
after setting
，
press“ENTER”to save
，
press“ESC”to surrender.
1.5 setting up TILT run direction
