THE-ONE EASY, Инструкция по эксплуатации

Страница: 57 / 66

WARNING!
Before carrying out any type of maintenance, switch off and remove the key. If the poles of the
battery are dirty, clean the poles so as to not to reduce the efficiency of the battery or burn the
poles themselves.
CHAIN TENSION ADJUSTMENT:
The chain may loosen after a certain period of time; please follow the instructions below:
Loosen the rear axle bolts. If the chain is too loose, adjust the chain bolts on both sides
clockwise and place them in place. If the chain is too tight, adjust the bolts counter-clockwise.
Keep the crank and the wheel aligned. If you cannot adjust the chain properly, contact your
nearest dealer.
ADJUST THE BRAKES:
The correct adjustment of the brakes ensures control and provides safety to the driver: the
brakes are adjusted like any other bicycle. To be in good condition it is important to make sure
that the brakes are working and that the power supply stops.
Once the brakes have been adjusted, make sure that the wheels turn, that there are no
obstacles, and that once the brakes are pulled the engine stops working.
LUBRICATION:
To maintain your e-Bike for a long time, the following parts of the bicycle should be regularly
lubricated every six months: front axle, chain, rear axle, freewheel (overspray joint), rear fork
and other rotating parts.
No lubrication is required for the electrical parts, as they are already lubricated at the factory.
If you have any problems, contact your nearest dealer for assistance.
CLEANING:
The e-Bike should be cleaned with a damp sponge, taking care not to wet the electrical parts
(bars, connectors, motor, cables, handlebar controls, etc.). Dry with a cloth. When cleaning the
e-Bike, do not use continuous jet steam or direct water. Use a cloth to avoid a short circuit for
electrical components. The e-Bike has a durable finish and does not need wax. Clean with a
mild detergent and wipe to restore the original shine if necessary.
10. Maintenance