Thinner ice bridge setting:
By pressing the “Clean” button, you can decrease the size of the ice bridge. The “ICE FULL” LED
(white) will flash as you lower the ice bridge thickness and will finally be blinking at the setting of
thinnest ice bridge.
Thicker ice bridge setting:
By pressing the “Mode” button, you can increase the thickness of the ice bridge. The “ICE
HARVEST” LED (yellow) will flash as the larger thickness is set and will blink when the setting of
thickest ice bridge has been reached.
After 10 seconds without any operation, the unit will automatically memorize the current state and
return to the previous (Ice Making) mode.
NOTE
: If during the ice bridge adjustment, the “ICE FULL”, “ICE MAKING” and “ICE
HARVEST” LEDS blink all at once, this indicates that the unit is in the default factory setting of the
ice bridge adjustment.
IMPORTANT:
The ice bridge adjustment has been set at the factory for optimum performance and it
is not recommended for a user to make this adjustment. This ice adjustment procedure should
therefore be made only by an authorized service technician
19
