MULTIPLE BENCH UNIT ASSEMBLY
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Storage Cube Bench (Corner Unit)
Assembly Instructions
Page 5 of 5
Made in China - r05
Configuration #2
Configuration #1
B
B
A
A
Align bracket with pilot holes and secure
each bracket with 2 screws as shonw,
using a Phillips head screwdriver. Repeat
steps for remaining units.
Using a hammer, firmly tap screws into
marked positions to create pilot holes.
Arrange corner and bench units into
desired configuration shown above.
Position 2 brackets onto 2 units. Using a
pencil, mark the bracket holes and set
brackets aside.
Note: Please note that mending plates are recommended and should be attached to
the underside of the top panels. However, mending plates are optional and can be
used at customer discretion.
Configuration #4
Configuration #5
Configuration #3
A: Single Unit (sold separately)
B. Corner Unit
A
A
B
B
A
A
A
A
A
B
A
A
A
A
A
A
A
A