A. Attach
toddler rail
to
end panel
with 2
panel bolts
. Secure, but do not over tighten, bolts with a
small Allen wrench
.
B. Attach
toddler rail
to
end panel
with 3
bracket bolts
as shown. Secure, but do not fully tighten, bolts with a
large
Allen wrench
.
3
4
Using a
large Allen wrench
, remove 3
bracket bolts
from crib assembly. Using a
small Allen wrench
, remove 4
panel
bolts
from crib assembly. At this point, release
side panel
as shown. Set all hardware/components aside until further
instructions.
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Larkin Toddler Rail
Assembly Instructions
Page 3 of 6
Made in China - r11
NOTE: Make sure the holes of the end panels
line up with the holes of the front/back panels
before hand tightening
B
A
A
B
B
A
A
B
