GJ HANDY & CO LTD USER WARRANTY POLICY
3.
Not covered by this warranty
(a)
The warranty policy does not cover any depreciation or damages caused by ordinary
wear, rusting or corrosion, lack of correct maintenance or operation, misuse, abuse,
lack of transportation or accident.
(b)
The warranty policy does not cover any costs necessary for the standard periodic
maintenance services instructed by the operators manual, or service parts
replacement which would include oil, filters, tyres, belts, brake linings, fuses, blades,
seals and other service parts unless it can be proven that the item has evidence of
faulty manufacture.
(c)
The warranty policy will not cover failure or damage caused as a result of parts or
accessories being modified without the written approval of GJ Handy & Co Ltd.
(d)
The warranty policy will not cover the unit if non-genuine parts have been fitted and
as a result damage has occurred to the unit.
(e)
The warranty policy is non-transferable and is only applicable to the original
purchaser.
4.
Disclaimer
(a)
This warranty is only a remedy for defect of products. GJ Handy & Co Ltd will never
warranty in terms of the merchantability or the fitness for a particular purpose.
(b)
No person is authorised to make any warranties, representations or promises,
expressed or implied, on behalf of GJ Handy & Co Ltd, or to modify the terms
conditions or limitation of this warranty policy in any way.
(c)
Neither GJ Handy & Co Ltd nor any company affiliated with GJ Handy & Co Ltd shall
be liable in any event or manner whatsoever for incidental or consequential
damages or injuries, including, but not limited to, loss of crops, loss of profit, out of
pocket expenses or profits, rental of substitute equipment or other commercial
losses.
5.
General
(a)
Most warrantable failures show up within the first few weeks of use. These failures
are usually straightforward and warranty assessment is relatively easy.
(b)
Failures relating to cutter decks and belts need careful investigation, as the cause
may not always be straightforward. Look for damage to blades and pulleys especially
when the cutter belt or blade boss have snapped or cracked as this could be due to
impact damage.
(c)
Customers should always refer to the operator/instruction manual when any
disputed problem arises, you will find most areas covered within the manual.