The Handy THTS, Инструкция по эксплуатации и список запасных частей

Страница: 7 / 20

ASSEMBLY
STEP 1

Install the impeller onto the gearbox and axle assembly.

Align the impeller with the hole on the axle, located nearest the gearbox.

Insert M4x20 screw, through the side of the impeller and the gearbox axle. Tighten until
secure.
STEP 2

Place hopper upside down and install the u-frame using 4x M6x40 screws. Tighten until
secure.
STEP 3

Install the wheel assembly frame (with outer bushing) on each side of the gearbox axle,
ensuring the axle fixing hole is located as imaged below.

Insert M6x50 hex bolt through wheel assembly & hopper frame and secure with M6 lock nut.
Do not fully tighten the bolts.