The Handy THSBENCH-G, Инструкция по эксплуатации

Страница: 13 / 28

FIXING RETURN SPRING AND CHAIN
Fig. I, step 1.
Take the cotter pin and washer from the
guiding pipe with spring.
Fig. I, step 2.
Push the log carriage to the base frame until
the open end of the guiding pipe is inserted
into the angle part at the base frame.
Fig. I, step 3
Secure the pipe with the washer and cotter
pin.
Fig. I, step 4.
Fix the open end of the chain to the base
frame at the left side with bolt M8×50, two
washers and a nut.
GUARD PLATE OF INNER SAW BLADE COVER
Fig. I, step 5
Install the guard plate of the inner saw blade
cover on the saw blade guard with a M5 nut
and two flat washers.
FLAT WASHER
(x2)
M8x50 (x1)
FLAT WASHER
(x2)
M5 (x1)