The Handy THLS-6G, Инструкция по эксплуатации, Страница: 13 / 32

BLEED SCREW
IMPORTANT
Before operating the logsplitter, the Bleed Screw
should be loosened a few rotations until air can go
in and out of the oil tank smoothly. Air flow through
the Bleed Screw hole should be noticeable while the
logsplitter is working. Before moving the logsplitter,
ensure the Bleed Screw is tightened to avoid oil
leaks
.
FAILURE TO LOOSEN THE BLEED SCREW WILL KEEP THE SEALED AIR IN HYDRAULIC SYSTEM COMPRESSED.
SUCH CONTINUOUS AIR COMPRESSION WILL BLOW OUT THE SEALS OF THE HYDRAULIC SYSTEM AND CAN
CAUSE PERMANENT DAMAGE TO THE LOG SPLITTER, WHICH IS NOT COVERED UNDER THE TERMS &
CONDITIONS OF THE MANUFACTURERS WARRANTY.
MAX PRESSURE LIMITING SCREW
DO NOT ADJUST THE MAX PRESSURE LIMITING SCREW!
Max pressure was set before the log splitter ex work and the max pressure limiting screw is sealed with glue to
ensure the log splitter works under pressure no more than 6 tons.
The setting was done by qualified mechanic with professional instruments.
Unauthorized resetting will cause the hydraulic pump fail to output enough splitting pressure or RESULT IN
SERIOUS INJURY AS WELL AS DAMAGE TO THE MACHINE .
TRANSPORTING YOUR LOGSPLITTER
The logsplitter is equipped with 2 wheels for minor moving. To move the logsplitter to the work site. Grip the
handle to tilt the logsplitter slightly after making sure the oil tank cover is tightened.
DO NOT TRANSPORT THE LOGSPLITTER WITH WOOD LOADED