2.
Align the two mounting holes of the log tray B to the holes on the side of the splitter. Insert one socket
head cap screw M6×12 and spring washer 6 back into the mounting hole, using 5mm Allen Key.
3.
Insert Allen Key screw M6×12 and locknut M6 through the Log Tray B and Rear Guiding Plate and tighten
using 5mm Allen Key and 10mm Spanner.
4.
Loosen the cup head bolt and nut on the front leg, insert the open end of support strut A onto the bolt
and then tighten the nut using 12mm Spanner.
