The Handy THLS-4, Руководство оператора и список запасных частей

Страница: 10 / 20

RAM ADJUSTMENT
The Handy Log Splitters are fitted with a Ram Adjustment Knob which reduces any
unnecessary movement of the ram, allowing for quicker and more efficient use of the tool.
Warning: When adjusting the ram movement do not put your hands between the hand
knob and the logsplitter, as accidental release of the Control Handle would cause the
returning hand knob and handle to trap and crush your hand against the splitter.
•
To adjust the ram movement, first undo the hand knob.
•
Then without a log on the work table depress the Control Handle and the start
button.
•
When the gap between the ram and the splitting wedge is the intended size, release
the start button, but continue to hold the Control Handle to keep the ram in place.
•
Slide the hand knob along the pipe to set the gap size. The closer you move the
Ram Adjustment Knob towards the Log Splitter, and the more you slide it down the
pipe, the smaller the gap will be left between the ram and the splitting wedge.
o
If the gap is correct you should place the hand knob against the log splitter.
o
If the gap is too small you can leave an equivalent space between the knob
and the logsplitter so that the ram returns further back.
o
If the gap is too small you will have to press the start button to reduce it before
setting the Ram Adjustment Knob.
•
Once you have set the hand knob at the
desired position, retighten it to adjust the
movement of the ram.
•
Make sure that your hand is clear of the
hand knob area. You can now release the
Control Handle. The Ram should now return
to the desired position whenever you
release the start button and Control Handle.
You can repeat these steps if further
adjustment is required.
Ram
Adjustment
Knob
10