SPECIFICATIONS
The manufacturer reserves the right to change the product specification and livery according to
continued product improvements.
Model Number
THISWB
Product Number
193895001
Voltage
230-240V~, 50Hz
Rated Power (Watt)
2500
Idle Speed (rpm)
4500
Maximum Branch Diameter (mm)
45
Collector Capacity (Litre)
40
Cable (m)
3
Degree of Protection
IP24
Protection Class
II
Overall Size (mm)
(L) 460
(W) 360 front - 455 rear with wheels
(H) 1050 – 1230 with Hopper
Weight (kg)
G.W 14.5 - N.W 13.8
* The diameter of the branch is not the only factor that determines how easy it will be to shred. A
small branch can be difficult to shred when it has knots or is a particularly hard wood.
IMPORTANT INFORMATION
INTENDED USE
The device is intended for chopping up fibrous or woody organic material from household and
garden. It may not be filled with stones, glass, metal, bones, plastics or material scraps.
This product is not intended for commercial use. Generally acknowledged accident prevention
regulations and enclosed safety instructions must be observed.
Only perform work described in these instructions for use. Any other use is incorrect. The
manufacturer will not assume responsibility for damage resulting from such use.
ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 230V+10% (50Hz+1Hz) electrical supply which has protection
devices for under-voltage, over-voltage, over-current as well as a residual current device (RCD) with
maximum residual current rated at 0.03A.
EXTENSIONS LEADS
Improper use of extension leads may cause inefficient operation of the log splitter which can result
in overheating. Be sure the extension lead is no longer than 10m and its cross-section is no less than
2.5mm² to allow sufficient current flow to the motor. Avoid use of loose or inadequately insulated
connections. Connections must be made with a protected material suitable for outdoor use.
WORKING CONDITIONS
This log splitter is a domestic use model. It is designed for operating under ambient temperatures
b5°C and 40°C and for installation at altitudes no more than 1000m above M.S.L. The
surrounding humidity should be less than 50% at 40°C. It can be stored or transported under
ambient temperatures between -25°C and 55°C.
INSPECT YOUR BRANCH
Make sure there are no nails or foreign objects in branches to be shred.