The Handy 193878002 Скачать руководство пользователя страница 1

Страница: 1 / 20

01/02/2018

100LB (45.5kgs)

SALT SPREADER

Model No: THSS100 -- Product No: 193878002

DO NOT USE WITH ROCK SALT.

Using rock salt in this spreader will damage the mechanism and shorten the life of the product.

Refined ice melting salt can be used, but the user should be aware that using salt may corrode

certain components of the spreader and reduce the life of the machine.

Clean the spreader thoroughly after using refined de-icing salt.

ASSEMBLY REQUIRED

SAVE THESE INSTRUCTIONS

SPARES & SUPPORT: 01793 333212

Please read & understand this manual, paying attention to the safety instructions, before use.

The manufacturer reserves the right to change the product specification and livery according to

continued product improvements.

Images used are for illustration purposes only

INSTRUCTION MANUAL

Содержание 193878002





















Результаты поиска

Содержание 193878002

Отзывы:

Похожие инструкции для 193878002

Бренды по названию

Популярные бренды

The Handy 193878002, Инструкция по эксплуатации

Результаты поиска

Содержание 193878002

Отзывы:

Похожие инструкции для 193878002

Бренды по названию

Популярные бренды