GENERAL USE
Always operate the machine on a level surface, ensuring the machine to stable and fee from
obstructions
If using an extension cable, ensure it is suitable for outdoor usage, 14AWG or above and no
more than 10 metres in length.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
RESOLUTION
Motor cannot be
started
1.
No power
2.
Cable damaged
3.
Overheat protection
activated
1.
Check mains supply
2.
Check cable, replace or have repair by
approved electrician
3.
Let the motor cool down for over 15
minutes, before your resume work.
a.
Working depth too deep. Adjust tilling
depth. Run over same ground
multiple times, to reach required
depth.
b.
Tines are blocked, remove debris
c.
Soil is too hard, adapt working depth
accordingly. Run over same ground
multiple times, to reach required
depth.
Unusual Noise
1.
Tines are blocked
2.
Gearbox oil leak
3.
Loose nuts, bolts, or other
fastening
1.
Switch off the machine, wait for
remove the plug from the mains.
2.
Contact your local approved dealer
3.
Tighten all, if noise continues contact
your local approved dealer
Excessive Vibration
1.
Tines are damaged or
worn
2.
Working depth too deep
1.
Replace the tines or have machine
inspected by approved dealer.
2.
Adjust tilling depth. Run over same
ground multiple times, to reach
required depth.
Poor Tilling Results
1.
Working depth too low
2.
Tines are damaged or
worn
1.
Adjust tilling depth.
2.
Replace the tines or have machine
inspected by approved dealer.
