STEP 7
Turn the wheel support over to rest on the wheels. Place the Latch Stand Bracket onto the draw
bar, sliding it underneath the Latch Lock. Place the Latch Stand Plate on top of the latch stand
bracket. The tabs at the ends of the channels must face the rear.
STEP 8
Place the poly tray down onto the Wheel Support & the Latch Stand Plate. Fasten the tray to the
wheel support using eight M8x16 flat head bolts and M8 lock nuts. Fasten the tray to the Latch Stand
Plate & Latch Stand Bracket using four M6x16 Flat head bolts and M6 lock nuts. Ensure finger tight
only.
