SPECIFICATIONS
The manufacturer reserves the right to change the product specification and livery according to continued
product improvements.
Model Number
THLSV7
Product Number
1938182001
Motor*
(230V ~50Hz 13A) 3000W, S6 40%,
Splitting Force
7 Ton
Forward Speed
3.6 cm/s
Retract Speed
16.5 cm/s
Hydraulic Pressure
25.2 Mpa
Hydraulic Oil Tank Capacity
3.5L
Hydraulic Oil
Type 22
Stroke Length (mm)
495
Log Capacity Diameter (mm)**
Min 80
–
300 Max
Log Capacity Length (mm)
Min 100
–
550 Max
Overall Size (cm)
L 84, W 91.5, H 149.5
Weight (kg)
N.W 98.2
–
G.W 103.5
Noise Pressure Level (LpA)
78.8 dbA under no load;
89.8 dbA under full load
Vibration
<2.5 m/s²
*
S6 40%, continuous operation periodic duty: time of one load cycle is 10 minutes, operation time at
constant load is 4 minutes, operation time at no-load is 6 minutes.
** The diameter of the log is not the only factor that determines how easy it will be to split. A small log can
be difficult to split when it has knots or is a particularly hard wood.
IMPORTANT INFORMATION
HYDRAULIC OIL
This machine is supplied with Hydraulic oil from the factory, to allow the machine to be used straight from the carton
following assembly. Do check the oil level (instructions available in the manual) prior to the first use and periodically
thereafter. Type 22 hydraulic oil is recommended.
ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 220-240V±10% (50Hz±1Hz) electrical supply which has protection devices of
under-voltage, over-voltage, over-current as well as a residual current device (RCD) which has a maximum residual
current rated at 0.03A.
EXTENSIONS LEADS
We do not recommend the use of extension leads with this product. The use of an extension lead can seriously reduce
the machines splitting capabilities.
WORKING CONDITIONS
This log splitter is a domestic use model. It is designed for operating under ambient temperatures b5°C and
40°C and for installation at altitudes no more than 1000m above M.S.L. The surrounding humidity should be less than
50% at 40°C. It can be stored or transported under ambient temperatures between -25°C and 55°C.
INSPECT YOUR LOG
Make sure there are no nails or foreign objects in logs to be split. The ends of the logs must be cut square.
Branches must be cut off entirely so that the trunk is relatively smooth.
Содержание 1938182001
Страница 19: ...WIRING HYDRAULIC SYSTEM DIAGRAMS WIRING DIAGRAM HYDRAULIC DIAGRAM ...
Страница 21: ...PARTS DIAGRAM THLSV7 1938182001 ...
Страница 27: ......