Lighting Instruction
MANUAL IGNITION
You can light the burner
manually if the ignition fails.
Wearing a protective glove.
1. Read instructions before
lighting.
2. Open the lid during lighting.
3. Simply place a match between
the coils on the end of the
matchstick holder, light the
match and insert it into the hole
of firebox to ignite.
4. Push and turn the knob to
“MAX” position, and make
sure the burner lights and stays
lighted.
5. Repeat 3~4 to light other
burners.
IGNITION
1. Open the lid (lid must always be open
when igniting).
2. Check that all controls are in the "off"
position. Open valve control on gas
container.
3. Push and turn the knob anticlockwise to
the “ MAX ” position . The burner will be
ignited . If the burner fails to ignite, turn
the burner off and repeat ignition after
5 minutes. To ignite remaining burners,
turn the next burner knob to “ MAX ”.
4.If ignition does NOT occur in 5 seconds,
turn the knob to “ OFF ” position, and
repeat step 3 up to 2 or 3 times.
5. If the burner does not ignite after step 4 ,
turn off the gas and wait 5 minutes for any
excess gas to dissipate, then either repeat
step 3 and 4 or light with an extemal flame.
6. Adjust burner control to appropriate
setting .
IF THE BBQ WILL NOT LIGHT USING NORMAL OR MANUAL LIGHTING, REFER
TO THE TIPS SECTION IN THE TROUBLESHOOTING MANUAL,
OR CONTACT YOUR DEALER.
FLAME CHARACTERISTICS
Check for proper burner flame
characteristics. Each burner is adjusted
prior to shipment; however, variations in the
local gas supply may take subtle necessary
adjustments.
17
Содержание PERFORMANCE 4.1
Страница 5: ...Explosion view 2 Exploded drawing 5 ...