Get ready for
thefirstyears.com
™
21
English
Camera Scan Mode
When multiple cameras are connected to your video monitoring system, the
camera scan mode can be used. Scan mode will display an image from each
camera for a short period of time and then advance to the next camera. For
2 cameras the display time is 10 seconds each. For more than 2 cameras the
display time is shortened to 6 seconds each. You have the option to turn on this
scan mode as follows:
1. Press the Menu button.
2. Use the top or bottom of the directional pad to scroll through the list of
preferences until “Camera Scan” is highlighted.
3. Press the OK button.
4. A “Camera Scan” screen will appear. The current setting will be highlighted.
Use the directional pad to highlight the setting that you want.
5. Press the OK button to confirm your selection.
Reminder: If you do not press the OK button, no change will be made.
6. Press the Menu button to return to the display mode.
Support
The Support menu selection provides you with information on how to contact
our customer service representatives, who will gladly assist you with any
problems that you may have with your video baby monitor system. To access
the Support screen:
1. Press the Menu button.
2. Use the top or bottom of the directional pad to scroll through the list of
preferences until “Support” is highlighted.
3. Press the OK button to display the Support screen.
4. Press the Menu button to return to the display mode.
Default
Menu choices are preset to the factory defaults listed below. Once you have
made changes to menu selections, you have the option of returning all choices
to the Factory Presets. To do so:
1. Press the Menu button.
2. Use the top or bottom of the directional pad to scroll through the list of
preferences until “Default” is highlighted.
3. Press the OK button.
