TO CLEAN
Measuring container, baskets, and adapter ring:
Dishwasher-safe (top rack only).
Measuring container should be placed in a dishwasher basket or wash in warm water using
mild liquid soap. Rinse with clear water.
Bottle warmer unit:
Always turn OFF and unplug before cleaning. Wipe surface of unit as
well as inside of warming chamber with a damp cloth or sponge using mild liquid soap.
Wipe with clear water. Air dry.
Do not immerse in water. Do not use scouring pads, solvents, or abrasive cleaners, as these
could damage the unit.
Warming chamber:
Mineral deposits (usually white in color) may form on the inner surfaces
of the warming chamber and can cause damage to the unit.
To remove them:
1. Unplug the unit.
2. Remove the basket, and wash separately as indicated above.
TO USE
1. Insert basket in warming chamber and position your bottle in the basket.
For standard reusable bottles (straight or angled):
Snap the adapter ring onto the top of
the warming chamber. The ring will keep the bottle properly centered for even heating.
For disposable bottles and baby food jars:
place into the lift-out basket and insert into the
warming chamber. Do not remove the larger basket.
NOTE:
Remove lid of baby food jar before placing in the lift-out basket. For wide-neck
bottles, neither lift out basket nor adapter ring is needed.
Never place a bottle or jar in the warming chamber without using one of the baskets. Bottle
or jar could be damaged or overheated.
2. Press the ON button. It will light up to indicate
that the unit is heating.
3. When the light goes out, the warming cycle is
complete. The heater will shut off automatically.
Remove bottle immediately so it will not continue
heating. Bottles/Jars may be hot. Remove from
chamber and allow 1 minute to cool before handling.
NOTE:
If bottle gets too warm, use slightly less water
next time. If bottles do not seem quite warm enough,
use slightly more water.
Wait 10 minutes before heating another bottle.
The heating element must cool before the unit can
be used again.
• Not recommended for use with glass feeding bottles
as sudden temperature change may cause glass to
break.
• Do not place your hands in or around the warming
chamber during heating.
• To prevent injury, always shake bottle well, and test
temperature of contents before giving bottle to your
child.
3
