IMPORTANT!
Gas appliances must be installed to
AS/NZS 5601.1:2013
by a qualified person and in accordance with these instructions. Failure to
install the appliance correctly will void your warranty and may cause a fire.
This fire should not be modified under any circumstances.
Under no circumstances should any combustibles such as paper, wood or
coal be used in this fire.
It is recommended that you have this fire serviced annually by a qualified technician.
Warranty repairs must be carried out by a Fire Dept. authorised technician.
This fire must ALWAYS terminate/flue outdoors.
Young children should be supervised to ensure that they do not play with the fire.
Clothing and other flammable materials should never be placed near the fire.
Never switch the fire on without the glass in place.
Please note that parts (near the flame) of this appliance, particularly the steel surrounding, glass panels to the face or the door,
become extremely hot during operation and can result in serious injury and burns if touched. It is therefore recommended that a
fireguard complying with BS 8423:2002 is used in the presence of young children, the elderly or infirm.
The Fire Dept. reserve the right to change all content contained herein and is subject to change without notice.
GD3 Installation Guide, Operating Instructions & Warranty
Step 1: Ensure all appliance components are correct and undamaged.
Step 2: Install plinth (if required).
Step 3: Install fire into cavity
Step 4: Install flue and connect to fire
Step 5: Connect and test electrical supply
Step 6: Connect gas supply and commission
Step 7: Lay the firebed
How to lay River Rocks firebed
How to lay Beach Driftwood firebed
How to lay Forest Logs firebed
Step 8: Show owner how to operate appliance.
Operating Instructions.
Trouble shooting
Warranty
Information in this installation guide may be subject to change without notice.
Please ensure that you have the current version before beginning installation.
If you have any queries, please contact The Fire Dept. on 0800 888 550
The GD3 fire installation process consists of 8 steps
Page
3
3
3
8
8
11
12
15
16
17
19
19
19
20
21-3-2017 VERSION 4 Page of
2
20