How to clean and cleaning schedule
How to clean and cleaning schedule
Cup Station/Sensor
Cup Station/Sensor
*Be sure to unping the power cord before cleaning.
*Be sure to unping the power cord before cleaning.
Wipe with damp cloth
Wipe with damp cloth
Remove moisture completely
Clean cup station more one
time in a day.
Remove moisture completely
Clean cup station more one
time in a day.
Ingredient (topping) Canister
Ingredient (topping) Canister
Put the canister into water and
soak ingredients solid and stuck
to canister in water
Then wash out with a soft sponge.
Assemble after remove moisture completely.
Clean canister more one time in a month.
Put the canister into water and
soak ingredients solid and stuck
to canister in water
Then wash out with a soft sponge.
Assemble after remove moisture completely.
Clean canister more one time in a month.
Drip Tray / Waste Bin /Drain Bucket
Drip Tray / Waste Bin /Drain Bucket
1. Empty the containers and clean inside with water
2. Need to check the waste box and
drain bucket is full to prevent
over ow (more once in a day)
•
It can cause troubles or unsanitary
condition.
3. If stop the machine working for a logn
need to clean the above containers
completely.
1. Empty the containers and clean inside with water
2. Need to check the waste box and
drain bucket is full to prevent
over ow (more once in a day)
•
It can cause troubles or unsanitary
condition.
3. If stop the machine working for a logn
need to clean the above containers
completely.
Exhaust Fan
Remove dust around the fan
with small brush.
•
Must turn o power prior to clean.
Exhaust Fan
Remove dust around the fan
with small brush.
•
Must turn o power prior to clean.
Exhaust Fan Cover
Put and soak in water then wash out
ingredient powder and dust.
•
And remove moisture completely
•
Refer to disassemble components
at page 20.
Exhaust Fan Cover
Put and soak in water then wash out
ingredient powder and dust.
•
And remove moisture completely
•
Refer to disassemble components
at page 20.
*To keep better taste and quality of espresso co ee,
need to clean and maintain brewer periodically.
*Recommended to clean brewer frequently.
1. Refer to the page 23, how to remove brewer.
While putting the multi tool on brewer, turn it
anticlockwise to the end then the lower pistion
move up to be easy to clean.
2. Pull the chute middle upward.
3. Pull and remove the co ee sludge guide as shown
in gure.
4. Turn brewer backward and wash the water inlet
tting part with owing water.
* This part is a route feeding hot water to extract
espresso.
If this line is blocked by co ee ground, hot water
feeding and extracting espresso is not available.
Must clean this part rst of all.
5. Clean the lower piston and screen lter with
small brush.
6. Wash the left, right, housing inside
(cylinder, screen lter inside) with owing water.
7. Remove moisture in brewer.
8. Wipe the inside of chute dry with paper or dry
cloth the remove moisture.
9. Reassemble the chute middle and co ee
sludge guide and t brewer well then place
grinder chute in original position.
<Cleaning schedule>
•
When Remove Brewer then clean it . message is displayed
on LCD screen, clean brewer part as instructed above.
<Monthly cleaning>
•
Need to check lubrication state of internal connections and
working parts once in a month.
•
Check the demage or defect in O-ring of upper & lower
piston and screen lter.
*To keep better taste and quality of espresso co ee,
need to clean and maintain brewer periodically.
*Recommended to clean brewer frequently.
1. Refer to the page 23, how to remove brewer.
While putting the multi tool on brewer, turn it
anticlockwise to the end then the lower pistion
move up to be easy to clean.
2. Pull the chute middle upward.
3. Pull and remove the co ee sludge guide as shown
in gure.
4. Turn brewer backward and wash the water inlet
tting part with owing water.
* This part is a route feeding hot water to extract
espresso.
If this line is blocked by co ee ground, hot water
feeding and extracting espresso is not available.
Must clean this part rst of all.
5. Clean the lower piston and screen lter with
small brush.
6. Wash the left, right, housing inside
(cylinder, screen lter inside) with owing water.
7. Remove moisture in brewer.
8. Wipe the inside of chute dry with paper or dry
cloth the remove moisture.
9. Reassemble the chute middle and co ee
sludge guide and t brewer well then place
grinder chute in original position.
<Cleaning schedule>
•
When Remove Brewer then clean it . message is displayed
on LCD screen, clean brewer part as instructed above.
<Monthly cleaning>
•
Need to check lubrication state of internal connections and
working parts once in a month.
•
Check the demage or defect in O-ring of upper & lower
piston and screen lter.
Do not use volatile cleaning agents, thinner, benzene, solvent
etcs for cleaning. It might cause trouble or injury.
Do not use volatile cleaning agents, thinner, benzene, solvent
etcs for cleaning. It might cause trouble or injury.
Multi tool
Multi tool
Chute middle
Chute middle
Chute
Chute
Sludge guide
Sludge guide
water inlet
water inlet
Screen lter
Lower piston
Screen lter
Lower piston
D
semble
mpone
s
D
semble
mpone
s
24
