1. Tank Level Check:
One button push will register current tank level.
2. Alarm Test:
Two button pushes will test alarm with one chirp.
3. Fill Mode:
Three button pushes will register current tank level and update level while filling. LED’s
will stay lit for five minutes. Alarm will start chirping slowly at 7/8 of a tank then very rapidly when
full. Push again to exit fill mode.
4. Battery Check:
Four button pushes will display remaining current battery power level.
(Battery levels below 2 will cause the alarm to chirp and the fault light to light during level check.)
5. Alarm Setting:
Five button pushes will light the LED corresponding to the current alarm setting.
(note: this will silence the alarm for 24 hours) If alarm is in the off mode no LED will light. In the
battery well there are three switches. The switch to the left will turn the alarm on (up) or off (down).
See below for switch settings. When desired setting/level is reached the alarm will chirp every
minute for one hour then once every hour. When the button is pressed
the alarm will be silent for 24 hrs and then start chirping again ……
User Guide
Alarm Factory Settings are set to the off position.
Please configure to your application needs during installation.
LED At A Glance Product Features include:
ON
OFF
ON
OFF
ON
OFF
ON
OFF
1/8 Tank
3/4 Tank
7/8 Tank
Alarm Switch Settings
1/4 Tank
ON
OFF
OFF
Factory Setting
The Cary Company
1195 W. Fullerton Ave.
Addison, IL 60101
thecarycompany.com
Contact us for help
Ph: 630-629-6600
