Setup and Installation
1
Attach (2) arm mounting brackets (G) as shown using (4) M8
nuts and (4) M8*50 screws. Brackets should face head of the
bed. Do not tighten at this time—this will allow ease of
attaching the arm assembly. (See Figure 1.)
Slide the arm assembly (J) into either
arm mounting bracket and attach with
(1) M10 nut. Now slide the arm though
the remaining bracket and attach with
(1) M10 nut. You should have plenty of
play for easy assembly. (See Figure 2.)
1
Complete the arm assembly by
tightening M8 nuts and M8*50 screws
on the arm mounting brackets. Finished
arm assembly should appear as shown.
(See Figure 3.)
3
2
Figure 1
Figure 2
Figure 3
2
M8
x4
x4
M8*50
M10
x2
