www.thatlittlebox.co.uk
1
The GpiO BOX USB is a user programmable MIDI control system designed for use
with remote buttons and triggers. Based on the popular USB GO BOX, the GpiO
BOX USB uses buttons attached to its 2 XLR sockets rather than on board
controls to trigger MIDI commands.
The GpiO BOX has 2 XLR connectors on
its front face. These are inputs for
Buttons, switches or any contact closure,
such as the GPIO output from a mixing
desk or redundant switch system. Each
XLR can be used to connect up to 2
Controls or a single illuminated Control.
The front panel also features a 3-
position slide switch used to set the
operating mode of the box.
The rear of the GpiO Box is the same as that found on the USB GO BOX and
features 2 USB B outputs, allowing for simultaneous control of 2 computers.
There is also a Power /Status LED Status LED that will display the currently
selected mode of the GpiO BOX USB.
USB
USB 1
USB 2
Power/Status LED
