6
Maintenance and Adjustment
6.7 Cleaning the Cutter
53
1. If the Cutter jams or malfunctions turn the Printer Off.
2. Remove the Cutter assembly from the Printer.
3. Remove any jammed paper.
4. Wet a cotton swab in Isopropyl Alcohol and use
it to remove any build-ups of adhesive.
5. There is a hole (circled) on each side of the
Cutter. Insert a 3mm hex key into one of these
holes and use the key to turn the cutter blade
clockwise to allow access to the entire length
of the blade.
6. Allow the Cutter to dry.
7. Re-install the Cutter assembly and turn the Printer back On. The cutter blade will go back to its original position.
* Remember to turn off the printer before touching the cutter
**The labels should be at least 30 mm long to ensure correct functioning of the cutter.
1RWH
