• If using the Microfiber Ultra Cloth (Optional item)
Attach the Ultra Cloth to the Mop Head (Part 16) by, followong the same
instructions as provided above for the Microfiber Cloth.
Microfiber Ultra Cloth is soft and durable with hundreds of super
absorbing fringes, ideal for your sealed hardwood, ceramic and other
types of flooring.
Ultra Cloth care:
• Machine wash 60 ºC (140 ºF)
• Do not bleach
• Do not use softener
NOTE:
Do not operate the H2O Mop
®
Ultra
™
without a Mop Pad such as either Microfiber Cloth or Disposable Pad and
Microfiber Ultra Cloth in place.
2) Fill the Water Tank (Part 9)
NOTE: Make sure that the H2O Mop
®
Ultra
™
is unplugged.
• Using the Measuring Cup:
1)
Open the rubber plug.
2)
Using the measuring cup (Part 19) fill the Water
Tank (Part 9) until it reaches the MAX line indicated on the tank. Do not overfill.
• Directly from Tap
1)
Release the Hand-Held Steamer Body Lock (Part 7) by lifting up
2)
Push the Hand-Held Steamer Release button (Part 6) upward
3)
Take Hand-held Steamer out by lifting upward and pulling backward.
4)
Press the Water Tank Release button down and Pull Water Tank out.
5)
Remove the rubber plug and fill the water tank directly from tap. Close the rubber plug and wipe off any
water spills. Block the valve hole on the water tank with a finger so water doesn’t drip from the water tank
valve wile filling under tap and moving back to the Hand Held Steamer body.
6)
Put the water tank back and make sure that it is firmly positioned in its designated slot.
H20 Mop
®
Ultra
™
uses tap water.
However, in areas with hard water, distilled water should be used for better performance.
IMPORTANT:
Make sure the COPPER BALL inside the water tank is always submerged in water while operating the H2O Mop
®
Ultra
™
.
WARNING:
Never put cleaning detergents or scented products into the H2O Mop
®
Ultra
™
.This will make the operation
unsafe and damage the unit.
PLEASE READ BEFORE USE
The H2O Mop
®
Ultra
™
is designed to thoroughly clean floor surfaces, such as marble, ceramic, carpet, stone,
linoleum, sealed hardwood floor and parquet. Not all floors types are suitable for steam cleaning. On surfaces that
have been treated with wax, the wax may be removed by the heat and steam action. Do not use on unsealed floor-
ing or let unit stand on any wood or heat sensitive floor for an extended period of time. This could cause the wood
grain to rise. When using on vinyl, linoleum or any other heat sensitive floors, use extra caution. Too much heat
can melt
U S E R ’ S G U I D E
6
U S E R ’ S G U I D E
11
HOW TO USE ACCESSORY TRAY
(OPTIONAL ITEMS)
1)
Insert the Accessory Tray tongue (located on the bottom of the Accessory Tray) in the designated slot on the
back of the H2O Mop
®
Ultra
™
Steamer Body.
2)
Push the Accessory Tray against the H2O Mop
®
Ultra
™
Steamer Body (Part 8) until it clicks in.
To remove the Accessory Tray:
1)
Release the Accessory Tray Lock on the back, top part of the H2O Mop
®
Ultra
™
Steamer Body (Part 8) by lifting
up the button.
2)
Pull the Accessory Tray back to detach .
tongue
slot
