For Best Results
•
For best slicing results, foods should be firm.
•
For round fruits or vegetables such as tomatoes, potatoes or
beets, use a knife to cut off a small portion to create a flat end.
For larger foods, cut in half and slice cut-side down.
•
For vegetable rounds, cut long foods such as zucchini and
cucumbers into 2.5-inch/6 cm lengths before placing vertically in
Food
Holder.
•
For best grating results, cheese should be cold and cut into
2-inch/5 cm pieces.
5 i n 1 K i t c h e n G r a t e r
Note:
Never hand wash Blade Cartridges with a sponge or
dishcloth. Never towel dry. Wipe the grater body with
damp cloth as needed.
1.
Select desired blade cartridge.
Instructions For Use
6.
When done with slicing or grating remove
remains of food from the food holder.
Rinse all used components under running water and
clean with mild detergent. Let it dry and store.
Wash all components with warm water and mild detergent prior to first use
4.
Position food holder with the food onto the
grater body and place the 5 in 1 Kitchen Grater over
a bowl or a food tray. Bottom of the main body has
notches to sit securely on a bowl rim
2.
Slide blade cartridge into designated slot in
the grater body (located next to the built in
Crinkle Cutter) until it securely fits in.
3.
Remove food holder from grater body. Pull
up the knob on the food holder to expose the
metal prongs. Place the food into the food
holder by pushing food onto prongs inside
food holder
5.
Apply steady pressure to food holder and
move it in a continuous downward and upward
motion over blade. Repeat until done.
1
2
1
2
1
1
1
2
3
4
C A U T I O N :
•
Keep fingers away from blade when using and cleaning
•
Keep out of children’s reach
•
Always use food holder when slicing and grating. Do not slice
or grate any food that cannot be held by food holder
•
When using food holder securely grasp round top keeping
fingers and thumb away from blade and outer edges of food
holder
•
Food holder prongs and cartage blades are sharp and may
cause injury if not used properly
5in1KG-Eng.
