11
Assembly Instructions
7
8
9
Guide the string around
the top of the frame
once.
Thread the string from
behind through the
hole highlighted here
in yellow.
Pull the string to the opposite end of the frame and then rotate
the frame around again, so the free end of the string is facing you.
Pull the string back over the top of
the frame, as shown here:
Thread the string over the middle hole and
insert another blue joint pin into the hole
highlighted here in yellow, securing
the string in place.
Done!
Rotate the joint pin to tighten the
string, winding the string around it. In
this way, tighten the string so that it is totally
taut and doesn’t droop at all.
