H-Genie
®
User Manual
v. 1.7.
page:20 of 29
The set value should be 10 bar above your planned flow reaction pressure
to ensure a positive flow of hydrogen out of the H-Genie
®
and into the flow
reactor.
5.2.5 Press OK after you have set the appropriate value. The
or
buttons may
be used to raise the set value by + or
– 1 value.
Figure 19: FLOW mode ready to start
5.2.6 Once all the parameters have been set, then press START.
5.2.7 Once the H-Genie
®
has generated the set pressure and the hydrogen is eluting
from the system, pressurize your flow reactor.
