Seite 9 / 10
6) Setting and Adjusting Speed
Use the switch (1) to start the platter turning on the depending speed. In the medium position,
the device is set to the standby mode. An orange LED shows the currently active speed.
The speed of the turntable was set in our factory using most precise equipment. This setting is
stable for a long time period. If re-adjusting is needed, use the screwdriver delivered with the
TTT-Slim II.
The screwdriver is set thru the hole at the right side of the TTT-Slim II and connected to the
internal potentiometer. Turning the key clockwise will decrease; turning it counter clockwise
will increase the speed of the platter.
7) Cleaning
For cleaning the TTT-Slim II, please use a soft and clean towel. The high density inlays of the
platter and the clamp shall be cleaned with a wet microfiber towel. For this process, please use
water only, neither cleaning nor dissolver-liquids.
33
1
45
