Thales Cinterion MV31-W, Описание аппаратного интерфейса, Страница: 9 / 76

Cinterion ® MV31-W Hardware Interface Description
0 Document History
10
t
MV31-W_HID_v01.009a 2022-04-27
Public / Preliminary
Page 9 of 76
Preceding document: Cinterion
®
MV31-W Hardware Interface Description, Version 00.050
New document: Cinterion
®
MV31-W Hardware Interface Description, Version 00.057
Preceding document: Cinterion
®
MV31-W Hardware Interface Description, Version 00.007
New document: Cinterion
®
MV31-W Hardware Interface Description, Version 00.050
Preceding document: Cinterion
®
MV31-W Hardware Interface Description, Version 00.006
New document: Cinterion
®
MV31-W Hardware Interface Description, Version 00.007
Preceding document: Cinterion
®
MV31-W Hardware Interface Description, Version 00.005
New document: Cinterion
®
MV31-W Hardware Interface Description, Version 00.006
Chapter What is new
2.1 , 3.1 Changed maximum supply voltage to 4.8V.
5.7 Revised Table 27 Summary of reliability test conditions.
6.2 Revised Table 38 EN-DC Configurations.
Chapter What is new
Throughout
document
Removed details about mmWave antenna connectors as mmWave bands are not sup-
ported with this product variant.
2 Revised Figure 1 and Figure 2 showing MV31-W top and bottom view.
3.1 Revised signal properties in Table 2 .
3.2.5 Added resistor value to Figure 16 .
4.1.1 Added GNSS frequencies.
5.2 Added max temperature for automatic thermal shutdown.
5.6 Revised ESD information.
6.1 Removed some comments supported CA configuration tables.
Chapter What is new
5.4 Revised power supply ratings.
5.5 Added timing Sequence Requirement together with its subsections.
6 New Appendix with Supported LTE CA Configurations and Supported EN-DC Configu-
rations.
Chapter What is new
2.1 Revised supported Bands.
2.1 , 3.1 , 5.4 Changed lowest supply voltage to 3.14V ( Table 3 ).
3.1 Revised Table 2 column Pin Type.
3.2.6 Revised USB interface description.
4 Revised notes of Table 12 .