R
epair
P 2 / 7
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Wrench 8
[2] LUBRICATION
[1] NECESSARY REPAIRING TOOLS
Retaining ring pliers ST-2N (1R003) .................... For removal/installation of Safety cover
Bearing setting pipe 16-8.2 (1R026) ..................... For removing Gear
Ring 22 (1R217) .................................................... For removing Gear
Bearing extractor (1R263) ..................................... For removing Bearing box
Bearing extractor (1R269) ..................................... For removing Ball bearing
Retaining ring S and R pliers (1R291) ................... For removal/installation of the Retaining ring on Spindle
Wrench for bearing retainer (1R316) ..................... For removal/installation of Bearing retainer
Put 8g of Makita grease N No.1 in the gear room of Gear housing complete.
[3] DUSASSEMBLING AND ASSEMBLING
CAUTION: Be sure that the tool is switched off and unplugged before starting disassembling/assembling.
CAUTION: When using a blower for cleaning, always wear safety goggle to protect your eyes from metal dust.
[3] -1. Replacement of Base
DISASSEMBLING
1) Remove (+) Pan head screw M5 from the hinge portion of
Base while holding Hex lock nut M5-8 with wrench 8 or the
like so that it cannot turn together with the screw. (
Fig. 1
)
2) Release depth adjustment lock, and then remove Pan head
screw M4x8. Now Lock plate can be removed from the depth
guide of Base. Remove Hex nut M6, and now Lock lever
section can be disassembled as illustrated in
Fig. 2
.
Always follow the instructions of the SAFETY RULES and OPERATING INSTRUCTIONS described in the
instruction manual.
(+) Pan head screw M5
Hex lock nut M5-8
Lever plate
Gear housing (blade case)
Flat washer 6
(253804-1)
Lock plate
Hex nut M6
Pan head screw M4x8
Flat washer 6
(253783-3)
Depth guide
Cap square neck bolt M6x20
ASSEMBLING
Do not forget to put Flat washer 6 (Part No.253783-3) between
Gear housing (blade case) and the depth guide of Base. (
Fig. 3
)
Be careful not to place Flat washer 6 (Part No.253804-1) there.
The two Flat washers can be easily distinguished by outer
diameter as illustrated in
Fig. 4
.
Flat washer 6
(253783-3)
Depth guide
Gear housing cover
Gear housing cover
Flat washer 6
(253804-1)
15mm
Flat washer 6
(253783-3)
25mm
