MZ10D7 User Manual V7.0
3
Operation Instruction
i.
Restore to factory default settings
Step 1:
Open controller from back casing and press Reset Button at Controller
board
Step 2: Press
“0”
Step 3: Press
“#”
Step 4: Press
“888”
Step 5: Press
“*”
Note:
This only restore the program password and controller parameter
settings, the authorized cards will not be deleted
ii.
Enter Programming mode
Step 1: Press
“#”
Step 2: Input program password
(default password “1234”)
Note: If entering in program mode successfully, the buzzer will make 2
short “di di” sound
Function setup
a.
Key “0”: change programming Pin (4 digits)
Step 1: Enter programming mode
Step 2: Press
“0”
Step 3: Input new password
Step 4: Press
“#”
b.
Key “1”: Add Card By Reader
0. Read Card :
(Auto save location)
Step 1: Enter programming mode
Step 2: Press
“1”
Step 3: Press
“0”
Step 4: Present the card
Step 5: Repeat step 4 if got more cards
Step 6: Press
“#”
Step 7: Press
“*”
1.
Save Card with ID
:
(Manual save Location )
Step 1: Enter programming mode
Step 2: Press
“1”
Step 3: Press
“1”
Step 4: Press
(000
– 999)
3 Digit ID
Step 5: Present the card
Step 6: Press
“#”
Step 7: Repeat
Step 4, 5, 6
if got more cards
Step 8: Press
“*”
Card added successfully will make 2 short “di di”, otherwise a long
“di” sound.
Note:
