TGW NBS 30 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 64

NBS IOM
12
GENERAL CONSIDERATIONS
ELEVATION (TOB)
The minimum elevation at the discharge end of an NBS sortation line is 24". The drive unit is located there and
requires a space 24" high by 60" long by the frame width. Extra room along side the drive should be provided to
allow maintenance personnel access to either side of the drive unit.
DIVERT LOCATIONS
•
The leading edge of the first divert module must be a minimum of 28" from the charge end of the sorter.
•
The trailing edge of the last divert module must be a minimum of 70" from the discharge end.
•
The leading edge of a 30° spur mounts 6" ahead (up stream) of the center line of an NBS 30 divert.
•
The leading edge of a 30° spur mounts 13½” ahead (up stream) of the FOURTH roller on an NBS 30 WAVE
divert.
•
The location of a divert lane is centered or slightly downstream of the center line of the transfer rollers in a
NBS 90 and a NBS 90SP.
•
One NBS 90 transfer with rollers up to 45" in length can transfer to two or four separate lanes.
•
A single direction transfer to two lanes is called a "Dual Transfer"
•
A bi-direction transfer to two lanes each side is called a "Quad Transfer"
AVAILABLE DRIVE SELECTIONS
1 HP @ 60 FPM
1.5 HP @ 90 FPM
2 HP @ 120, 150, 180 FPM
2 HP @ 200, 220, 250, 300 FPM
3 HP @ 180, 200, 220, 250, 300 FPM
5 HP @ 250, 300 FPM
7.5 HP @ 300, 325, 375, 425 FPM
SORTER NOMINAL WIDTHS (# OF BELTS)
18" with 4 Belts on 3-1/2" Centers
25" with 6 Belts on 3-1/2" Centers
32" with 8 Belts on 3-1/2" Centers
90480005rev010614