P/N: 1176718
REV: 02/17/2021
Page
4
of
32
1.1: TGW
S
AFETY
R
ECOMMENDATION
TGW Systems Equipment Warranty
TGW Systems warrants that the material and
workmanship entering into its equipment is
merchantable and will be furnished in accordance with
the specifications stated.
TGW Systems agrees to furnish the purchaser without
charge any part proved defective within 2 years from
date of shipment provided the purchaser gives TGW
Systems immediate notice in writing and examination
proves the claim that such materials or parts were
defective when furnished. For drive components
specific to XenoROL® (i.e. Xeno belts, slave Xeno
belts, drive spools, standard and speed-up, and
spacers), this warranty shall be extended to five years
of running use, provided the conveyors are applied,
installed and maintained in accordance with TGW
Systems published standards. Other than the above,
there are no warranties which extend beyond the
description on the face hereof. Consequential damages
of any sort are wholly excluded.
The liability of TGW Systems will be limited to the
replacement cost of any defective part. All freight and
installation costs relative to any warranted part will be at
the expense of the purchaser. Any liability of TGW
Systems under the warranties specified above is
conditioned upon the equipment being installed,
handled, operated, and maintained in accordance with
the written instructions provided or approved in writing
by TGW Systems.
The warranties specified above do not cover, and TGW
Systems makes no warranties which extend to, damage
to the equipment due to deterioration or wear
occasioned by chemicals, abrasion, corrosion or
erosion; Purchaser's misapplication, abuse, alteration,
operation or maintenance; abnormal conditions of
temperature or dirt; or operation of the equipment
above rated capacities or in an otherwise improper
manner.
THERE ARE NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, EXTENDING
BEYOND THOSE SET FORTH IN THIS STATEMENT
OF WARRANTY.
Rev 03/01/2019
TGW Environment Standards
TGW equipment is designed to be installed in
a clean, dry warehouse environment.
Exposure to extreme humidly, direct sunlight,
blowing dirt or rain can permanently damage
some components of TGW conveyor. In
particular, the curing agents in concrete are
known to attack and degrade the urethane
conveyor components.
When installing conveyor on a new
construction site, be sure that the concrete is
properly cured before setting conveyor on it.
In addition, if conveyors are stored in the
proximity of curing concrete, proper
ventilation must be used to direct the curing
agent fumes away from the conveyor.
Failure to comply with these guidelines will
void the TGW warranty on any failed
components that result from these
environment issues.
03/01/2019
