Preparation tools
Phillips wrench
STEP1
：
Open the cover
STEP2
：
Installation of lamps
Mount
the
fixture
to
the
pole
and
adjust
the
angle
（
-5to5°
）
use
tools
：
Can
be
used
for
8/4”(50.8mm)-
2-
3/8”
(60.3mm)
light
poles
STEP3
：
connecting cables
9/16”Socket Wrench
WARNING
Always turn power to fi xture OFF before performing any work on control wiring. Turn transmitters off before working
on main control lines. Performing any work on control connections while fi xtures are receiving the signal may result
in transient or fl uttering control signals which can cause damage to the luminaire. FAILURE TO FOLLOW THIS
WARNING MAY LEAD TO LUMINAIRE INTERNAL DAMAGE AND FAILURE.
Press the snap to open the lid.
9/16
"
Socket Wrench
